[Blink] "Stalker Voice" when calling mobile numbers

[Adrian Georgescu]

In this case, both FritzBox and 1&1 will perform some sort of codec translation. Try changing the codecs in your side maybe another combination just works.

You can see what codec is being used in the Window -> Logs -> RTP

The codec priority can be changed in the account RTP section.

Adrian


On Mar 22, 2011, at 2:05 PM, Klaus Meßlinger wrote:

>> When you call to PSTN you are passing a PSTN gateway. It may be a codec related problem.
>> 
>> Do you have this problem when you call between two SIP clients directly or only when you call to a PSTN number?
>> 
>> Adrian
> 
> 
> 
> Hi Adrian,
> 
> my home phone setting is VoIP, managed by the Fritz!Box router. Calling any number - landline/PSTN, VoIP, mobile - is OK when I use my handset. It is also OK when I use Blink Pro, except for outbound calls to the mobile network.
> 
> My handset and Blink Pro are registered with Fritz!Box as separate telephone devices, so technically outbound calls should use the same protocoll from there.
> 
> I have not yet cross-tested the effect with mobile numbers from different networks, but I will. 
> 
> Klaus
> 
> _______________________________________________
> Blink mailing list
> Blink at lists.ag-projects.com
> http://lists.ag-projects.com/mailman/listinfo/blink
>