[Blink] Blink hangs on Linux when accessing sound device

[Adrian Georgescu]

It would help a lot if you could add another audio device to know if is the software or the hardware the problem here.

Adrian

On Dec 5, 2010, at 11:03 AM, Juha Heinanen wrote:

> i got blink working with pulseaudio.  the trick on debian squeeze was to
> add myself to pulse and pulse-access groups (the latter might not be
> necessary).  then i started pulseaudio with these params as normal user:
> 
> pulseaudio --daemonize --high-priority --log-target=syslog --disallow-module-loading=0
> 
> after that i got audio out from blink, but quality is quite bad.  after
> a few tests, it looked like 32000 frequency gave best (but still not
> good) results.
> 
> blink cpu utilization when blink is idle is now around 45%, which is
> still too high for an idling process.
> 
> thanks for your help,
> 
> -- juha
> _______________________________________________
> Blink mailing list
> Blink at lists.ag-projects.com
> http://lists.ag-projects.com/mailman/listinfo/blink
>