[Blink] Blink hangs on Linux when accessing sound device
Juha Heinanen
jh at tutpro.com
Sun Dec 5 11:03:14 CET 2010
i got blink working with pulseaudio. the trick on debian squeeze was to
add myself to pulse and pulse-access groups (the latter might not be
necessary). then i started pulseaudio with these params as normal user:
pulseaudio --daemonize --high-priority --log-target=syslog --disallow-module-loading=0
after that i got audio out from blink, but quality is quite bad. after
a few tests, it looked like 32000 frequency gave best (but still not
good) results.
blink cpu utilization when blink is idle is now around 45%, which is
still too high for an idling process.
thanks for your help,
-- juha
More information about the Blink
mailing list