[Blink] Blink Linux installation problems
Gianguido Piani
gipiani at mailbox.org
Tue Dec 17 10:05:09 CET 2024
Dear Tijmen,
thanks for the very quick reply.
Software updating is so fundamental that compatibility with the most
recent versions is a must. It is now so extremely difficult to find a
VoIP client for Linux, even just for basic function such as calling a
PSTN number over a proxy/ provider, that blink would be a very welcome
solution.
We need a cheap, quick and dirty VoIP solution, but one that works in
all environments.
The last Ubuntu versions have for themselves several questionable
issues, but full compatibility at least with Debian must be ensured.
Gianguido
On Mon, 2024-12-16 at 10:16 +0100, Tijmen de Mes wrote:
> Hi,
>
> It tells you that a python version less than 3.12 is needed. We did
> not package it for this Ubuntu version due to some issues.
>
> I will check hopefully this week if I can do it.
>
> It should work on Debian Bullseye/Bookworm and Ubuntu Focal/Jammy
>
> Best regards,
>
> Tijmen de Mes
> —
> AG Projects
>
>
> > Op 14 dec 2024, om 22:23 heeft gipcontact at mailbox.org het volgende
> > geschreven:
> >
> > Hi!
> >
> > Running Ubuntu 24.04, would like to install Blink.
> >
> > It does not work. Can anybody help? Thanks in advance.
> >
> >
> > Gianguido
> >
> >
> > $ sudo apt update & upgrade, done
> > $ sudo apt-get install blink
> >
> > Reading package lists... Done
> > Building dependency tree... Done
> > Reading state information... Done
> > Some packages could not be installed. This may mean that you have
> > requested an impossible situation or if you are using the unstable
> > distribution that some required packages have not yet been created
> > or been moved out of Incoming.
> > The following information may help to resolve the situation:
> > The following packages have unmet dependencies:
> > blink : Depends: python3 (< 3.12) but 3.12.3-0ubuntu2 is to be
> > installed
> > Depends: python3-sipsimple (>= 5.3.0) but it is not going to be
> > installed
> > E: Unable to correct problems, you have held broken packages.
> > $
> >
> > Actually, I DO have and run Python 3.12.3
> >
> > I tried with setup.py from python3-sipsimple
> >
> > $ python3 setup.py
> > Traceback (most recent call last): github
> > File "/home/gianguido/Software/blink/setup.py", line 8, in <module>
> > from setup_pjsip import PJSIP_build_ext
> > ModuleNotFoundError: No module named 'setup_pjsip'
> > $
> >
> > I then downloaded setup_pjsip.py and run setup.py again, to get the
> > message
> >
> > ModuleNotFoundError: No module named 'Cython'
> >
> > How can these problems be solved?
> >
> > Is there some SIMPLE way to install the blink softphone in a Linux/
> > Debian environment?
> >
> > Thanks!
> >
> >
> > _______________________________________________
> > Blink mailing list
> > Blink at lists.ag-projects.com
> > https://lists.ag-projects.com/mailman/listinfo/blink
>
> _______________________________________________
> Blink mailing list
> Blink at lists.ag-projects.com
> https://lists.ag-projects.com/mailman/listinfo/blink
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ag-projects.com/pipermail/blink/attachments/20241217/c81c51d0/attachment.htm>
More information about the Blink
mailing list