[Blink] Chat failure with Blink

[Saúl Ibarra Corretgé]

Hi Javier,

On Feb 17, 2014, at 3:52 AM, ZHU Javier wrote:

> Any suggestion on the issue?
>  
> Thanks,
> Javier
>  
> From: blink-bounces at lists.ag-projects.com [mailto:blink-bounces at lists.ag-projects.com] On Behalf Of ZHU Javier
> Sent: 2014年2月14日 16:37
> To: Blink Support Forum
> Subject: Re: [Blink] Chat failure with Blink
>  
> Saúl Ibarra Corretgé,
>  
> Thanks for your response.
> Below is the snapshot of my configuration.
> I didn’t check the option of “Always use my relay for outgoing sessions”.
> <image001.png>
>  

That checkbox only applies to outgoing sessions.

> Why Blink didn’t use the IP/port in the SIP/SDP message?
>  

Here is what's happening: you are getting an incoming session with MSRP, so Blink will always try to use a relay unless it finds a=setup:actpass on the SDP, which is the case. Since you didn't specify a relay Blink will do a DNS SRV lookup for _msrps._tcp.yourdomain.com (it may fallback to the A record if it finds nothing in the SRV), and use the result, in case there was a result. Apparently Blink did find a result, and tried to connect to it, without success. Hence the call failure.


Regards,

--
Saúl Ibarra Corretgé
AG Projects