[Blink] How to register Blink without using full domain name

[Adrian Georgescu]

You must use only the IP address in the domain part, without the port. Example:

> user at 172.22.22.16

To connect to a non-standard port or another protocol than udp to your server, you can set the outbound proxy of your account. Example:

172.22.22.16:5060;transport=udp

Replace the port and protocol accordingly.

Adrian

On May 4, 2011, at 12:45 PM, Kerry Larmer wrote:

> HI,
> 
> We have a SIP Server within our network that is accessed by IP address and port only.
> 
> What is the correct way to register Blink to this?
> 
> We’ve been using the following format: “exension at ipaddress:port”
> 
> But we’re seeing DNS error in the logs:
> 
> -
> 2011-05-04 16:03:07.636000 [blink.exe 292]: DNS lookup NAPTR 172.22.22.16:5060 failed: DNS record does not exist
> 2011-05-04 16:03:07.640000 [blink.exe 292]: DNS lookup SRV _sips._tcp.172.22.22.16:5060 failed: DNS record does not exist
> 2011-05-04 16:03:07.644000 [blink.exe 292]: DNS lookup SRV _sip._tcp.172.22.22.16:5060 failed: DNS record does not exist
> 2011-05-04 16:03:07.649000 [blink.exe 292]: DNS lookup SRV _sip._udp.172.22.22.16:5060 failed: DNS record does not exist
> 2011-05-04 16:03:07.657000 [blink.exe 292]: DNS lookup A 172.22.22.16:5060 failed: DNS record does not exist
> 
> How can we get around this?  We don’t have a fully qualified DNS name to enter to connect to this SIP Server.
> 
> 
> Thanks
> Kerry
> _______________________________________________
> Blink mailing list
> Blink at lists.ag-projects.com
> http://lists.ag-projects.com/mailman/listinfo/blink

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ag-projects.com/pipermail/blink/attachments/20110504/c5546be1/attachment.html>