[Blink] TLS on BlinkPro

[Karl]

Yes.  They are both checked in each case.  And UDP is unchecked (otherwise it always gets used).

Karl

On 2011-01-26, at 11:35 AM, Saúl Ibarra Corretgé wrote:

> Hi Karl,
> 
> On 01/26/2011 05:54 AM, Karl wrote:
>> Hi,
>> 
>> I have set all of that up and just duplicated the generated certificate.
>> I added my root and chain root to the ca.crt.
>> 
>> However, Blink always tries UDP if it is enabled. If I change the
>> Outbound Proxy and add ;transport=tcp or ;transport=tls I get errors in
>> the logs as follows:
>> 
>> TCP
>> 2011-01-26 07:20:08 Account('201 at qatar1.protocolis.com
>> <mailto:'201 at qatar1.protocolis.com>') failed to register: DNS lookup
>> failed: Transport tcp dictated by URI is not supported (retrying in
>> 31.65 seconds)
>> 2011-01-26 07:20:08 Error: The account 201 at qatar1.protocolis.com
>> <mailto:201 at qatar1.protocolis.com> failed to register(DNS lookup failed:
>> Transport tcp dictated by URI is not supported)
>> 
>> TLS
>> 2011-01-26 07:20:25 Account('201 at qatar1.protocolis.com
>> <mailto:'201 at qatar1.protocolis.com>') failed to register: No more routes
>> to try (retrying in 1.11 seconds)
>> 2011-01-26 07:20:25 Error: The account 201 at qatar1.protocolis.com
>> <mailto:201 at qatar1.protocolis.com> failed to register(No more routes to try)
>> 
>> So its as if Blink does not support TLS or TCP..
>> 
> 
> Do you have TCP and/or TLS transports enabled? Check Preferences->Settings->SIP->Transport List setting.
> 
> -- 
> Saúl Ibarra Corretgé
> AG Projects
> _______________________________________________
> Blink mailing list
> Blink at lists.ag-projects.com
> http://lists.ag-projects.com/mailman/listinfo/blink