[Blink] New Blink Qt release 0.1.3 for Linux and Windows

Juha Heinanen jh at tutpro.com
Sun Sep 5 12:56:22 CEST 2010

Adrian Georgescu writes:

> Try to increase the sample rate starting from 8000 until it still
> works for your particular device (set both the input and output). Try
> set the sample rate to 8000, 16000, 32000 and 44100, in this order
> take the higher value that works for your audio device.

i tried and set audio.sample_rate to 8000, but it didn't have any
positive effect:

        +-- alert_device = default
audio --|-- input_device = default
        |-- output_device = default
        |-- recordings_directory = recordings
        |-- sample_rate = 8000
        |-- silent = False
        +-- tail_length = 200

> Also, because Blink opens a separate alert device, by trying to open
> both output and alert device to the same value, will lead to a failure
> on systems that have audio devices that do not support native hardware
> mixing and can be opened only once. For this case, the only way to
> make use of the audio system is to use the dmix or pulse ALSA
> plugins.

i can play many audio files at the same time using aplay command, so i
don't think that lack of audio sharing is the problem.

-- juha

More information about the Blink mailing list