[SIP Beyond VoIP] Sylkserver Basic Setup

Adrian Georgescu ag at ag-projects.com
Thu Dec 29 11:28:21 CET 2011


Enable SIP trace in SylkServer configuration. Then check the SIP trace and the system syslog when the calls take place. This should provide some clues.

Adrian

On Dec 29, 2011, at 8:19 AM, Marc Abrams wrote:

> 
>> From: Marc Abrams <marca56 at gmail.com>
>> To: sipbeyondvoip-request at lists.ag-projects.com
>> Date: Wednesday, December 28, 2011 9:04:34 PM
>> Subject: Sylkserver Basic Setup
>> 
>> Hi, 
>> 
>> I've installed the basic Sylkserver 1.3.0 on Ubuntu 11.10 and for audio it works fine. However, I'm unable to make it work for either IM or screensharing. If someone has some quick pointers on enabling these features, I would be much obliged.
>> 
>> I'm behind an Apple Airport Extreme Base Station and I have an enterprise session border controller (an Intertex IX78) set as the outbound proxy. I have both a DID assigned to the server (which works) and I can also reach it with a SIP URI (e.g., sip:marc at mocet.com). I can have multiple calls on the bridge. I've tested up to six so far and it works for G.722 and G.711 (mixed). 
>> 
>> All facets of the audio bridge work fine, so I'm not sure it's a SIP issue that is preventing the IM and screensharing from working. Maybe it's TLS or something else?
>> 
>> Thanks.
>> 
>> marc.
> 
> _______________________________________________
> SIPBeyondVoIP mailing list
> SIPBeyondVoIP at lists.ag-projects.com
> http://lists.ag-projects.com/mailman/listinfo/sipbeyondvoip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ag-projects.com/pipermail/sipbeyondvoip/attachments/20111229/98b51c11/attachment.html>


More information about the SIPBeyondVoIP mailing list